Welcome to Wuxi Samcy Equipment Co., Ltd!

叉车厂家

news

product

contact

Wuxi Samcy Equipment Co., Ltd.

Contact: Mr. Wang (Sales Manager)

Phone: +86-51085599388

Mobile: +86-13861699388

Website: www.samcy.com

Email:info@samcy.com

Address: MengCun village, Hudai town, Binhu District, Wuxi, Jiangsu, China

Zip code: 214161




Forklift seat belt, is your forklift loaded?

Your current position: Home >> News >> Technical knowledge

Forklift seat belt, is your forklift loaded?

Date of release:2018-03-04 Author: Click:

 With the increasingly frequent use of forklift rents, safety accidents involving forklifts also occur. In these accidents, almost every year, the related personnel are crushed, disabled, even crushed and killed because of jumping forklift or forklift trucks, and the cause of the accident is that the operator did not comply with some basic principles. For example, there is no seat belt.

堆高车价格       

To ensure the safety of the seat belt, the following manual and manual inspection should be done before using the heap of high priced car safety belt.

1. ensure that the seat belt assembly is complete, no shortage and no damage.

The 2. is made with no brittle fracture, broken strand or kink.

3. metal parts without cracks, welding without defects, no serious corrosion.

4. the hook tongue of the hook is not misaligned with the bite level, and the self-locking device is complete and reliable.

The 5. locking position has no obvious deviation, and the surface is smooth.

6. when the belt is pulled down slowly, the seat belt should be pulled out of the winder smoothly. When the seat belt is pulled, it should be pulled. Otherwise, it is invalid for the seat belt. After the use, press the button to remove the plug.

7. remember to return the seat belt when you get off, so as to prevent the trip.

A forklift seat belt is as important as a safety belt in a sharp turn or other emergency. Many forklift drivers do not wear the habit of wearing safety belts. It is considered that the forklift speed is not fast and the belt is not necessary, but when the forklift is dumped, it will cause people to fall and fall, so the forklift driver must wear the seat belt and stay in the car to ensure the safety of the life.

Accident case: the forklift truck overturned and the boss was crushed to death.

At half past seven on February 7, 2015, at about half past seven in the morning of Gangzha District, a steel material company in Qin Zao street, Gangzha District, Nantong, happened a tragedy. When the company owner Hu was unloading the forklift truck, the forklift suddenly turned over.

Small knowledge of forklift belt

1. The structure of a forklift seat belt.

The ribbon is the main body of the seat belt. Besides requiring it to have enough strength, the ribbon must have good wear resistance, cold resistance, heat resistance, water resistance, and color faded. In addition, the elongation and energy absorption characteristics of the ribbon are also required. This is to ensure the safety of the belt in the collision accident. When the body moves forward, it will not crash into the internal parts of the body because of the hard wound and the restricted body, nor the excessive movement of its elastic forklift driver. It is made of nylon, polyester, polyester and other synthetic fibers, which have a width of about 50mm and about 1.2mm thick, with enough strength, extensibility and energy absorption. For the technical performance of ribbon, different seat belts are specified, and it is necessary to comply with the regulations. The function of the rewinder is to store the ribbon and lock the ribbon, and it is the most complex mechanical part in the seat belt. The rewinder is equipped with an inertial sensing element and ratchet pawl mechanism or locking mechanism. When the forklift truck is running normally, the reel can not only make the ribbon flexible with the movement of the user's body, but also make the ribbon relaxed. But when the emergency braking, collision, or vehicle state changes sharply, the sensitive element in the reel will drive the lock mechanism to lock the scroll, make the ribbon fixed to a certain position, and bear the load of the user's body added to the ribbon. This is also the most popular seat belt retractor in the safety belt market. The fixed parts are the ear pieces, plug-ins and bolts connected with the car body or the seat components. The integrated installation position and firmness will directly affect the protective effect of the seat belt and the comfort of the forklift driver. Therefore, the installation position and the installation standard of the safety fixed parts are also clearly stipulated in various countries. For example, the safety belts used in imported and domestic forklift trucks must meet the international 8854/98 and 8853/98 or the domestic 3C mandatory technical certification standards. Forklift seat belts must be equipped with red buttons to release the system.

Two. The installation of the forklift seat belt. In order to give full play to the role of forklift seat belts, we need to pay attention to the following matters when installing forklift seat belts.

1. Installation of the belt at the waist should pay attention to the two fixed points of the belt should be high on the floor of the forklift truck body, the seat frame or the side wall of the forklift truck body. The location of the fixed point on the floor is related to the driver's hip point on the seat. The angle between the fixing point of the waist webbing and the horizontal line of the H point and the forklift body should be as much as 450. In addition, the forklift seat belt fixed position must be firmly locked, seat belt steel sheet at least to 3MM thickness is not made.

2. The installation of the shoulder straps. The location of the upper fixed point of the shoulder webbing should not be less than 140mm from the fixed point to the seat center line.

3, the installation of the accessories. Whether the location of the attachment is suitable or not is one of the important conditions to decide whether the forklift seat belt can play an effective role. The horizontal distance between the two lower mounting accessories shall not be 350 mm, and the distance between the two mounting accessories and the seat center line shall be as equal as possible.



In the event of an accident

When a forklift has a violent collision or emergency braking in the front part of a forklift, the driver's body moves forward quickly as a result of inertia. The pretightening device of the seat belt will be caught in a moment, tighten the loose seat belt when worn, and try to "pull" the driver's body to restrain the displacement and buffer and dissolve the inertia. Sexual force, which absorbs most of the impact energy, prevents two collisions, avoiding or alleviating the injury of the forklift driver; then the driver's body is back to the seat. The whole process is almost instantaneous. The driver is in a completely passive situation. In this case, the rescue tool may be the seat belt, and any vehicle has this device, so it is necessary to develop the habit of fastening the seat belt. In the related accident investigation, if the seat belt was fastened, the death rate could be reduced by 57%, the side crash could be reduced by 44%, and the vehicle could be reduced by 80% when the car crashed. So we can see the importance of the forklift seat belt.

After the accident

The seat belt has been tightened under the action of the pre tightening device. But we hope that after the inertia force passes, the tension strength of the seat belt is reduced immediately to reduce the driver's force. This special task is done by the safety belt pull limiter: on the seat belt, there is a pre - tightening device, as described before, and the underneath the seat belt. The core in the shaft is a steel torsional rod. When the load reaches the predetermined situation, the torsion bar begins to twist, so that the seat belt is relaxed to a certain extent, and the tension limit function of the seat belt is realized. Under the combined action of the belt pre-tightening device and the belt tension limiter, the protective capability of the seat belt almost reaches the ideal state. The so-called safety belt can provide reliable safety protection for occupants.

Maintenance and maintenance

With the longer use of the forklift, the forklift seat belt will be aging, the most important is that the internal reed is aging, the seat belt will be too loose or can not be tightened in time, and the seat belt has begun to "strike". In a time of emergency, if the safety belt is too loose to cause the crew to slide out of the seat belt, it will cause serious damage. If the seat belt has been subjected to a strong tensile load in use, even if it is not damaged, it should be replaced and cannot continue to use. The maintenance personnel should be asked to do a comprehensive inspection of the related safety system of the forklift. Repair; if the forklift truck had a serious collision, the safety belt must be replaced in time. Every forklift driver can check whether his seat belt is aging or lose his nervousness before work. The general seat belt device has the function of the belt tension limiter. In addition, often check the position of the loosening button on the buckle regularly to confirm that the button must be easily touched and open so that the seat belt can be unraveled in case of occurrence. When the seat belt is too dirty, it can be scrubbed with a neutral soap and a warm water, with a cloth or sponge, and do not use a dye or a beautiful white agent. Otherwise, it will corrode the safety belt and do not brush it too hard to avoid the tensile strength of the seat belt. Do not use the seat belt before it is dry. Check the locking button to enter the foreign body, if there is dust entering the shoulder joint of the shoulder, it will make the seat belt react slowly and clean with clean dry cloth in time. If the seat belt is aged or damaged, it must be replaced. Seat belts can not be disassembled at any time. If there are problems, professional forklift maintenance personnel must be repaired.

Usage method

Before use, try to pull the belt out and adjust the lock near the waist. The rest of the seat belt can be around the shoulder, the length of the shoulder strap is adjusted near the chest, and the amount of affluence that can be put into a fist should be left. Safety belt inspection method: when the belt is pulled down slowly, the seat belt should be pulled out of the winder smoothly. When the seat belt is pulled, it should be pulled. Otherwise, it is invalid for the seat belt. After the use, press the button to remove the plug. It is not allowed to alter the working structure and principle of the forklift safety belt without authorization, so as to make it safer and more effective to protect the driver. Forklift trucks must be replaced with new safety belts after they encounter serious collision and tumbling. New forklift seat belts must be replaced because of the normal chemical effects of the outside, such as sunning and rain to make the forklift seat belt damaged, cracked, aged or soft. Safety of forklifts must be replaced when metal connecting parts are deformed, bent, broken, rusted or aged. The forklift safety belt must be replaced when the forklift safety belt can not be retracted automatically, can not be automatically locked, and when the buckle is not tight, it must be replaced to ensure the normal safety.


The address of this article:http://en.samcy.com/news/372.html

Key word:叉车厂家,电动叉车品牌,堆高车价格

Recently browse:

 堆高车价格

Contact: Mr. Wang (Sales Manager)

Phone: +86-51085599388

Mobile: +86-13861699388

Website: www.samcy.com

Email:info@samcy.com

Address: MengCun village, Hudai town, Binhu District, Wuxi, Jiangsu, China

Zip code: 214161

 

QQ截图20180629162312.jpg

WeChat 

Please leave a message for us
Please input the message here, and we will contact you as soon as possible.
Name
Contacts
Tel
Telephone
Email
mailbox
Add
address